converting rear to 5 lug <-- New

[bodiedspacecab91]

ive got a 91 isuzu spacecab and i need to convert the back to 5 lug with the simpleist way possible ive heard that toyota axles will work but im not sure any advise would be helpful

[satchnc]

I would use '84-'88 Toyota. They are a few inches narrower than the factory axle.

[framekiller]

can i use the isuzu driveshaft? and what years can i use for the front?

[92zuzuman]

use 88-95 toyota hub and rotors. They go right onto the spindles with no problem.

[bodiedspacecab91]

now are you talking about the whole axle assembly or just axle shafts?

[low_pup]

you will have to redrill the driveshaft for the toyota rear end or get an adapter made or even a new driveshaft. the whole rear end has to be swapped out you cant just do the shafts unfortunately. the 84-88 yota rear end is a few inches narrower. could make for a good dish on your wheels. its what i have on one of my isuzus.

and for the front you mainly just need the hubs from a junkyard off the front 88-95 toyota the rotors too if you dont plan to get new ones. you just have to run a space on the caliper to move it like 1/8 of in inch for the new rotors.